[قلم صريح]

Static RAM is more expensive, requires four times the amount of space for a given amount of data than dynamic RAM, but, unlike dynamic RAM, does not need to be power-refreshed and is therefore faster to access. One source gives a typical access time as 25 nanoseconds in contrast to a typical access time of 60 nanoseconds for dynamic RAM. (More recent advances in dynamic RAM have improved access time.) Static RAM is used mainly for the level-1 and level-2 caches that the microprocessor looks in first before looking in dynamic RAM.
Dynamic RAM uses a kind of capacitor that needs frequent power refreshing to retain its charge. Because reading a DRAM discharges its contents, a power refresh is required after each read. Apart from reading, just to maintain the charge that holds its content in place, DRAM must be refreshed about every 15 microseconds. DRAM is the least expensive kind of RAM.
The initial function of the BIOS is to identify, test, and initialize system devices such as the video display card, hard disk, floppy disk and other hardware. The BIOS sets the machine hardware into a known state, so that software stored on compatible media can be loaded, executed, and given control of the PC.